Product Introduction:

The BK-10 Vickers hardness tester is a basic type of microhardness tester, which uses an LCD display screen. The operating panel can select the holding time of the hardness scale HV or HK for various test forces, and the brightness of the light source can be adjusted infinitely. During operation, the D1 and D2 values measured by the eyepiece can be directly input, and the hardness value will be directly displayed on the LCD display screen.

Applicable scope:

Heat treatment, carbonization, quenching and hardening layers, surface coatings, steel, non-ferrous metals, and small and thin parts.

Product Introduction:

The BK-10 Vickers hardness tester is a basic type of microhardness tester, which uses an LCD display screen. The operating panel can select the holding time of the hardness scale HV or HK for various test forces, and the brightness of the light source can be adjusted infinitely. During operation, the D1 and D2 values measured by the eyepiece can be directly input, and the hardness value will be directly displayed on the LCD display screen.

Applicable scope:

Heat treatment, carbonization, quenching and hardening layers, surface coatings, steel, non-ferrous metals, and small and thin parts.