Fixture model: BK-3P-A

Optional A or B type connectors:

A joint shaft outer diameter 20MM length 30MM (with lock)

Tight nut

B joint inner hole 20MM deep 30MM;

Pin hole diameter 10MM, from the center of the pin hole to the connector

The end face distance is 14.5mm.

When not equipped with connectors, clamp specific M12 internal teeth.

The width and height of the fixture support ,compression point are both

50MM, round rod R5 (customizable); Test adjustable

Span 150MM, with front and rear sample fixation

Material: 45#

Surface treatment: sandblasting nickel plating