Optional A or B type connector:

A connector, shaft outer diameter 20MM, length 30MM (with lock

Tight mother)

B connector inner hole 20MM deep 30MM;

The pin hole diameter is 10MM, the center of the pin hole to the connector

The end face distance is 14.5MM.

When not equipped with connectors, the clamp body has M12 internal teeth.

Clamp support/pressure point diameter 6MM,

The height is 75MM; the test sample width is 200MM,

The upper clamp has an adjustable test span of 100MM (total length 150MM).

The lower clamp has an adjustable test span of 150MM (total length 200MM).

Minimum test span 12MM.