Optional A or B type connector:

A flange shaft joint outer diameter 20MM length 30MM with

lock nut

B flange hole joint hole diameter 20MM deep 30MM;

The pin hole diameter is 10MM, the center of the pin hole to the connector

The end face distance is 14.5MM.

When not equipped with connectors, the clamp body has M12 internal teeth.

Fixture specifications:

25*28/25*53/25*80MM clip with stickers

Available in rubber surface and metal mesh surface.

The sample thickness that can be clamped is 6MM.

Tracheal joint inner hole=6MM